Dukane 8950W User Manual page 71

It e m
S E R V IC E
( c o n t i n u e d )
(continued on next page)
The following items are exempted.
SETUP: LAMP TIME, FILTER TIME
OPTION: SERVICE(GHOST), DATE AND TIME
NETWORK: WIRELESS AND WIRED SETUP
SECURITY: MY TEXT DISPLAY
• Operation is not available if SECURITY_
CLONNING LOCK is turned ON.
• The Screen_MyScreen can only be loaded.
CLONING load function on STANDBY MODE
• While the projector is in STANDBY MODE, press
the INPUT button of control panel together with ►
button, and then press ▲ button to start operating
the CLONING load function.
• During loading process, the three indicators of
control panel (POWER (orange), TEMP, LAMP)
will remain on.
• After the loading process, the three indicators
C L O NING
(POWER (orange), TEMP, LAMP) will turn off.
( c o n t i n u e d )
Then, you can remove the USB storage device.
• If the loading fails, the three indicators (POWER
(orange), TEMP, LAMP) will blink at the same
time.
• CLONING is invalid with the following conditions.
- CLONING LOCK is turned ON.
With this condition, the three indicators (POWER
(orange), TEMP, LAMP) will blink at approximately
three seconds intervals.
- If the STANDBY MODE is set to SAVING or
NETWORK(WOL).
- If there is no USB memory inserted into US B
TY PE A port.
- If PIN LOCK or lock of TRANSITION DETECTOR
is not being released.
- If a system error occurs.
• Please operate one of the following after loading.
- Press INPUT button and ◄ button of the control
panel at the same time.
- Wait at least five min. after loading.
- Restart the projector after re-plugging the AC
cable.
D e s c r i p t i o n
(IP ADDRESS, SUBNET MASK,
DEFAULT GATEWAY), MY IMAGE,
PRESENTATION, AMX D.D.
OPTION menu
7 1