Related Manuals for Black Box InvisaPC
Summary of Contents for Black Box InvisaPC
- Page 1 STEP X - Name of Step QUICK START GUIDE DTX1000SA-R, DTX1000SA-T INVISAPC DTX1000SA 24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BLACKBOX.COM...
- Page 2 STEP 1A - Transmitter Diagrams...
- Page 3 STEP 1B - Transmitter Components TABLE 1. DTX1000SA-T COMPONENTS NUMBER IN DIAGRAM AT LEFT DESCRIPTION DESCRIPTION Power LED LED indicates power status 5 VDC Power In connector Connect to supplied power adapter Connect to PC/workstation USB USB Type B connector connector RJ-45 connector Connect to LAN...
- Page 4 STEP 2A - Receiver Diagrams...
- Page 5 STEP 2B - Receiver Components TABLE 2. DTX1000SA-R COMPONENTS NUMBER IN DIAGRAM AT LEFT DESCRIPTION DESCRIPTION Powers on and off unit. LED indicates On/Off button power status. 2, 3 (2) USB Type A connectors Connect to USB peripherals Microphone Connect to microphone Speakers Connect to speakers 5 VDC Power In connector...
-
Page 6: Step 3 - Connect Power
STEP 4 - Connect the Peripherals CONNECT THE RECEIVER CONNECT THE TRANSMITTER 1. Attach the monitor, keyboard, mouse, USB 1. Attach the InvisaPC Transmitter to the and audio devices to the InvisaPC Receiver. target PC/workstation using DVI and USB Type B cables. -
Page 7: Default Settings
STEP 5 - Starting Up and Default Settings DEFAULT SETTINGS STARTING UP Default Settings: 1. Once everything is connected, press the Power button on the front of the InvisaPC Transmitter IP Address: 192.168.1.22 Receiver. Receiver IP Address: 192.168.1.21 2. The Graphical User Interface (GUI) will Type: Static appear on the screen. -
Page 8: Step 6 - Point-To-Point Installation
InvisaPC monitor, and mouse to the remote unit (remote Transmitter or the InvisaPC receiver is unit is on at this time). required. This enables you to install the system quickly, directly out of the box. In the 2. -
Page 9: Getting Started
5. Once the transmitter is configured, you can MATRIX INSTALLATION now configure the receiver. In a matrix installation, every InvisaPC 6. If the units are on different subnets, transmitter and receiver requires its own IP then routers will need to be used to properly address. - Page 10 STEP X - Name of Step COPYRIGHT 2017 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.