82 | Main Menu
4 Press Ok.
Time and Date
This sub-menu controls the displayed time and date on the home screen.
Note: If the Home Display Text Message feature is enabled, Home Mode Display Text may cover time and
date, depending on the Configurable Idle Screen settings.
Note: Infrastructure synchronizes the time and date. When not within the infrastructure signal range you
can set the values manually.
Setting Time and Date on the Display
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Display.
3 Select one of the following:
•
Time & Date — Your radio displays time and date.
•
Time Only — Your radio displays time only. Format Date sub-menu is disabled.
•
Date Only — Your radio displays date only. Format Time sub-menu is disabled.
•
Off — Your radio does not display time nor date. Format menu is disabled.
Related Links
Display
on page 22
Display
on page 79
Setting the Time Format
Prerequisites: If M
ENU
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Format → Format Time.
3 Select one of the following:
•
12-Hour — Displays the time with am (before noon) or pm (after noon) indication.
•
24-Hour.
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the
2 Select Setup → Time & Date → Set → Set Time.
3 Enter current time using N
4 Press Done.
Setting the Date Format
Prerequisites: If M
ENU
Send Feedback
| |
key.
MENU
→ Setup → Time & Date → Display is set to Time & Date or Time Only.
key.
MENU
key.
MENU
keys.
AVIGATION
→ Setup → Time & Date → Display is set to Time & Date or Date Only.