Setting Periodic Alert; D-Ptt Tones; Setting D-Ptt Tones; Display - Motorola MTP830 S Feature User Manual

Setting Periodic Alert

Procedure:
1 From the home screen, press the
2 Select Setup → Tones → Periodic Alert.
3 Select one of the following:
• Alert — Activates/deactivates periodic tone.
• Period — Indicates the time between each periodic tone.

D-PTT Tones

This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in idle or the
Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the permission to talk.
Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk. The D-PTT tone is not
audible on a sending radio.
Note: This feature needs to be enabled by your service provider.

Setting D-PTT Tones

Procedure:
1 From the home screen, press the
2 Select Setup → Tones → D-PTT Tones.
3 Select one of the following:
• D-PTT Mode — Activates/deactivates D-PTT tone.
• Tone Style— Indicates how many times the D-PTT tone is played.

Display

This menu item allows you to adjust your radio display settings.
Related Links
Display on page 22

Setting Flip Display

When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same time wishes to
read the display upside down.
Procedure:
1 From the home screen, press the
2 Select Setup → Display → Flip Display.
3 Select one of the following:
• On – to activate this feature.
• Off – to deactivate this feature.
key.
MENU
key.
MENU
key.
MENU
Main Menu | 79
| | Send Feedback