74 | Main Menu
Vibrate
This sub-menu allows you to determine if your radio vibrates, or rings, or both vibrates and rings when receiving a
call.
Setting Default Vibrate
Procedure:
1 From the home screen, press the
2 Select Setup → Vibrate.
3 Select one of the following:
•
Vibe then Ring
•
Vibe Only
•
Ring Only
Setting Detail Vibrate
Procedure:
1 From the home screen, press the
2 Select Setup → Vibrate → Details....
3 Select one of the following:
•
Duplex Calls — Sets the vibrate settings for Phone, PABX, and Duplex Private calls.
•
Simplex Calls — Sets the vibrate settings for Simplex Private Calls.
•
Group Call — Sets the vibrate settings forGroup Calls.
•
Messages — Sets the vibrate settings for status messages and text messages.
4 Select the required setting, and press Select.
Note: If you choose Duplex Calls, Simplex Calls or Messages, the settings available are Vibe then
Ring (for messages it is Vibe & Ring), Vibe Only or Ring Only. If you choose Group Call, the
settings available are Vibe On or Vibe Off only.
Ring Style
This sub-menu allows you to set the incoming call ring style.
Setting Ring Style
Procedure:
1 From the home screen, press the
2 Select Setup → Ring Style.
3 Select one of the following:
•
Duplex — To set the new ring style to all duplex calls.
•
Simplex — To set the new ring style to all simplex calls.
Note: Upon entry into this sub-menu, the display shows the current ring style used.
4 Scroll to the desired style and press Select.
Note: New ring style is played immediately for a few seconds. If necessary, adjust the volume level.
Send Feedback
| |
key.
MENU
key.
MENU
key.
MENU