Fastening The Outboard To The Transom - Mercury 60 Operation, Maintenance & Installation Manual

3. Do not install wedges or plates between the transom clamp brackets and
the transom (or jack plate). Refer to Figure 4.
a

Fastening the Outboard to the Transom

MOUNTING BOLTS
Outboard Transom Mounting Hardware ‑ Supplied with Outboard
Part Number
8M0071543 Outboard mounting bolt ½‑20 x 5.00 in. long (3.25 in. thread)
826711‑17
28421
54012
Part Number
67755005
67755006
814259
67755‑1
8M0071543
8M0038370
67755‑2
8M0028080
8M0032860
ENGINE INSTALLATION
b
c
54058
Part Name
Nylon insert locknut
Flat washer
Flat washer
Available Outboard Mounting Bolts
Figure 4
a - Boat transom or jack plate
b - Transom clamp bracket
c - Wedge/plate
½‑20
1.50 in. diameter
0.875 in. diameter
Description
½‑20 x 2.50 in. long (1.25 in. thread)
½‑20 x 3.50 in. long (1.25 in. thread)
½‑20 x 4.00 in. long (2.25 in. thread)
½‑20 x 4.50 in. long (2.25 in. thread)
½‑20 x 5.00 in. long (3.25 in. thread)
½‑20 x 5.50 in. long (3.25 in. thread)
½‑20 x 6.50 in. long (2.75 in. thread)
½‑20 x 7.50 in. long (2.75 in. thread)
½‑20 x 8.00 in. long (2.75 in. thread)
84
Description
eng