Printing A Network Status Sheet; Replacing Or Adding New Access Points; Changing The Connection Method To A Computer - Epson ET-3750 series User Manual

User's Guide
Message on the Network Environment
Message
*Multiple network names (SSID) that
match your entered network name (SSID)
have been detected. Confirm network
name (SSID).
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.

Printing a Network Status Sheet

You can check the detailed network information by printing it.
1. Load papers.
2. Select Settings on the home screen.
To select an item, move the focus to the item using the
3. Select General Settings > Network Settings > Network Status.
4. Select Print Status Sheet.
5. Check the message, and then print the network status sheet.
6. Close the screen.
The screen automatically closes after a specific length of time.

Replacing or Adding New Access Points

If the SSID changes due to the replacement of an access point, or an access point is added and a new network
environment is established, re-set the Wi-Fi settings.
Related Information
"Changing the Connection Method to a Computer" on page 39
&

Changing the Connection Method to a Computer

Using the installer and re-set up in a different connection method.
Network Settings
Solution
The same SSID may be set on several access points. Check the settings on the
access points, and change the SSID.
After moving the printer closer to the access point and removing any
obstacles between them, turn off the access point. Wait for about 10 seconds,
and then turn it on. If it still does not connect, see the documentation
supplied with the access point.
You can simultaneously connect up to four computers and smart devices in
Wi-Fi Direct (Simple AP) connection. To add another computer or smart
device, disconnect one of the connected devices first.
u d l r
39
buttons, and then press the OK button.