Instructions For Replacing The Lamps; Low Pressure Lamps; Uv Low Pressure Lamps - ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE Operating Instructions Manual

12/2012 1012945-00
5.8

Instructions for replacing the lamps

The UV effect of the lamps and thus the tanning effect decreases over the
course of time. Therefore, the replacement intervals specified in the mainte-
nance plan must be adhered to.
5.8.1

Low pressure lamps

Replace faulty UV low pressure lamps immediately.

Always replace the entire set of lamps after the specified operating time.

– Turn 90° and carefully remove from the socket.
– UV low pressure lamps possess a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.
– Push the pins vertically into the socket from above.
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the user).
Cleaning and maintenance
Operating instructions – 39/56