Maintenance - ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE Operating Instructions Manual

Component
1 Entry area
2 Foot mat (Plastic)
3 Control panel
4 Holding bars
Protective goggles
MP3 cable
5 Acrylic glass panels
6 Surfaces
12/2012 1012945-00
Interval
X
X
X
X
X
X
X
X
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.6

Maintenance

Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).
Cleaning and maintenance
Activity
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning and disinfection
Cleaning
Cleaning
Operating instructions – 37/56
See page
35
35
35
35
35
35
35
35