Function
Button sequence
1. UV lamps
5. Vibra Shape
(VIBRA)
12/2012
1012945-00
4.8.1
Navigation
The device is operated with the navigation ring.
Switch on UV lamps:
Tip the button once.
Switch off UV lamps/pause tanning:
Hold the button.
Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the tanning device. After selecting a function,
the respective diodes and the navigation ring flash for a few seconds. Settings
can be changed during this time.
Operation – Demonstration mode
–
press until
The audio functions and Vibra Shape can be tested in demonstration mode.
You have 30 seconds in which to select the function.
4.9
Functions
Description
START/STOP
Switch the UV lamps on/off during
tanning (in combination with Vibra
Shape: see below)
Select Vibra Shape (the diode at the
top)
Tip the button once: Vibration plate
will be switched off
Hold the button: Vibration plate and
UV lamps will be switched off
Programme 1
Programme 2
Programme 3
Programme 4
Information
If the UV lamps are switched off
during tanning, the tanning time
continues to run.
START/STOP also switches off the
UV lamps.
Operating instructions – 31/56
Operation