Step 5:
Use the
Right
Step 6:
Use the
highlighted value. Use the
highlight the Hour, Minute, and Second. (Time is indicated in
24hr. mode.)
Step 7:
Press the right-most Function button indicated as
screen. The new date appears on the Setup Screen.
The Time and Date are now set.
Step 8:
Press the
return to the beginning screen.
For more information on the Setup function, refer to the section,
Setup Screens on page 52.
FS-100 Portable DTE Recorder
navigation button to select the time and press the
Down
navigation button. The following screen appears:
SET TIME
11
: 21 : 13
HH : MM : SS
and
navigation buttons to change the
Up
Down
navigation button followed by the
Left
BACK
and
navigation buttons to
Right
Left
Quickstart
on the
BACK
button to
Select
27