Optional Attachments - KitchenAid 5KSM45A Manual

OPERATING THE STAND MIXER

Optional attachments

KitchenAid offers a wide range of optional attachments such as food grinders or pasta
makers. They may be attached to the Stand Mixer attachment power shaft, as shown here.
To attach: Check to make sure that the
1
Stand Mixer is unplugged and the speed
control is turned to "O".
Insert attachment shaft housing into
3
attachment hub, making certain that
attachment power shaft fits into
square attachment hub socket. It may
be necessary to rotate attachment
back and forth. When attachment
is in proper position, the pin on the
attachment will fit into the notch
on the hub rim.
To remove: Check to make sure that
5
the Stand Mixer is unplugged and the
speed control is turned to "O".
W11090745A_ENv14.indd 9
Loosen attachment knob by turning it
2
counterclockwise. Remove attachment
hub cover.
Tighten attachment knob by turning
4
clockwise until attachment is completely
secured to Stand Mixer, then plug into
the proper electrical outlet.
Loosen attachment knob by turning
6
it counterclockwise. Rotate attachment
slightly back and forth while pulling out.
9
2/27/17 2:58 PM