JVC KD-R985BTS Instruction Manual page 39

INSTALLATION/CONNECTION
Wiring connection (for KD-R985BTS/KD-R885BTS/KD-RD98BTS)
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to
professionals for your safety. Consult your car
audio dealer.
Vehicle
dashboard
Factory wiring
harness (vehicle)
Custom wiring harness
(separately purchased)
Brown (not used)
Recommended connection
JS_JVC_KD_R985BTS_K_EN_6.indd 35
MIC (Microphone input
terminal) ( 14)
To the steering wheel
remote control adapter
Join the same color wires together.
Blue:
To power antenna Blue/white: Remote (12 V
Blue/white:
To amplifier Orange/white: Illumination
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
Gray: Front speaker/3-way crossover: Mid range speaker (right)
Gray/black
White: Front speaker/3-way crossover: Mid range speaker (left)
White/black
Purple: Rear speaker/3-way crossover: Tweeter (right)
Purple/black
Green: Rear speaker *
Green/black *
Output
terminals
( 34)
Antenna terminal Fuse (10 A)
Light blue/yellow
350 mA)
2
/3-way crossover: Tweeter (left)
2
Signal cord (not supplied)
KD-R985BTS: USB cable (DC 5 V
1.5 A) (approx. 1.2 m/4 feet)
Expansion port (12 V 500 mA)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 11)
Remote wire (not supplied)
Ignition switch
Separate red wire
Car fuse block
Make this connection if your vehicle factory wiring
harness does not have "12 V ignition switch" wire.
* 1
Firmly connect the ground wire of the amplifier to the
car's chassis to avoid damaging the unit.
* 2
You can also connect a subwoofer speaker directly using
this lead without an external subwoofer amplifier. For
setting, 24.
1
JVC Amplifier *
35
ENGLISH
24/8/2016 2:37:35 PM