Troubleshooting - JVC KD-R985BTS Instruction Manual

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK
WIRING THEN PWR ON"
appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
• Radio reception is poor.
• Static noise while
listening to the radio.
Disc cannot be ejected.
"IN DISC" appears.
"PLEASE EJECT" appears.
Playback order is not as
intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears
and track skips.
"READING" keeps flashing.
"UNSUPPORTED DEVICE"
appears.
JS_JVC_KD_R985BTS_K_EN_6.indd 31
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. ( 4)
Connect the antenna firmly.
Press and hold to forcibly eject the disc. Be careful
not to drop the disc when it is ejected.
Make sure nothing is blocking the loading slot when
you eject the disc.
Press , then insert the disc correctly.
The playback order is determined by the file name
(USB) or the order in which files were recorded (disc).
This depends on the recording process earlier.
Check whether the track is a playable format. ( 29)
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
• Check whether the connected device is compatible with
this unit and ensure the file systems are in supported
formats. ( 29)
• Reattach the device.
Symptom Remedy
"UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach
appears. the device.
"USB HUB IS NOT This unit cannot support a USB device connected via a
SUPPORTED" appears. USB hub.
"CANNOT PLAY" appears. Connect a USB device that contains playable audio files.
The iPod/iPhone does not • Check the connection between this unit and iPod/
turn on or does not work. iPhone.
• Detach and reset the iPod/iPhone using hard reset.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
Correct characters are not • This unit can only display uppercase letters, numbers,
displayed. and a limited number of symbols.
• Depending on the display language you have selected
( 5), some characters may not be displayed correctly.
• Sound cannot be heard • Reconnect the Android device.
during playback. • If in [AUDIO MODE], launch any media player
• Sound output only from application on the Android device and start playback.
the Android device. • If in [AUDIO MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal to
unit. ( 29)
Cannot playback at • Make sure JVC MUSIC PLAY APP is installed on the
[AUTO MODE]. Android device. ( 7)
• Reconnect the Android device and select the appropriate
control mode. ( 8)
• If this does not solve the problem, the connected
Android device does not support [AUTO MODE]. ( 29)
31
ENGLISH
24/8/2016 5:00:47 PM