JVC KD-R985BTS Instruction Manual page 28

AUDIO SETTINGS
Speaker output settings
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY]) ( 23)
Select the output setting for the speakers [SPK/PRE OUT], based on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. ( 35, 36)
KD-R985BTS/KD-R885BTS:
Setting on
[SPK/PRE OUT]
REAR/REAR (default) Front speakers
output
REAR/SUB.W ( Not available )
SUB.W/SUB.W Front speakers
output
KD-RD98BTS/KD-RD88BT:
Setting on
[SPK/PRE OUT]
REAR/REAR Front speakers output
REAR/SUB.W (default) Front speakers output
SUB.W/SUB.W Front speakers output
24
ENGLISH
JS_JVC_KD_R985BTS_K_EN_5.indd 24
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT REAR
Rear speakers output
( Not available )
L (left): Subwoofer
output
R (right): (Mute)
Audio signal through lineout terminal
FRONT
Rear speakers output
Subwoofer output
Subwoofer output
KD-R780BT:
Setting on
[SPK/PRE OUT]
REAR/REAR
REAR/SUB.W (default)
SUB.W/SUB.W
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output. ( 35, 36)
SW
Setting on
Subwoofer output
[SPK/PRE OUT]
( Not available )
REAR/REAR
Subwoofer output
REAR/SUB.W
SUB.W/SUB.W
If [SUB.W/SUB.W] is selected:
– [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available.
– [POSITION R02] is selected in [FADER] and selectable range is [POSITION
R15] to [POSITION 00].
REAR/SW
Audio signal through lineout terminal
REAR/SW
Rear speakers output
Subwoofer output
Subwoofer output
Audio signal through rear speaker lead
L (left)
Rear speakers output Rear speakers output
Rear speakers output Rear speakers output
Subwoofer output
R (right)
(Mute)
16/8/2016 10:43:31 AM