JVC KD-R985BTS Instruction Manual page 20

BLUETOOTH®
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume *
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes *
* 1
This adjustment will not affect the volume of the other sources.
*
2 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2 until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
16
ENGLISH
JS_JVC_KD_R985BTS_K_EN_5.indd 16
On the faceplate
Press or the volume
knob.
Press and hold or
the volume knob.
Press and hold or
the volume knob.
Press .
1
Turn the volume knob
during a call.
Press during a call.
2
.
On the remote control
MIC GAIN
NR LEVEL
( Not available )
ECHO CANCEL
( Not available )
Make the settings for receiving a call
Press and hold
.
1
Press
2
Turn the volume knob to select an item (see the following
( Not available )
table), then press the knob.
3
Repeat step
( Not available )
To return to the previous setting item, press
( Not available )
SETTINGS
AUTO ANSWER
RING COLOR
RING ILLUMI
LEVEL –10 to LEVEL +10 (LEVEL –04): The sensitivity of the
microphone increases as the number increased.
LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the noise
reduction level until the least noise is being heard during a
phone conversation.
LEVEL –05 to LEVEL +05 (LEVEL 00): Adjust the echo
cancellation delay time until the least echo is being heard
during a phone conversation.
to enter Bluetooth mode.
2
until the desired item is selected or activated.
01 SEC to 30 SEC: The unit answers incoming call
automatically in the selected time (in seconds). ; OFF: Cancels.
KD-R985BTS/KD-RD98BTS:
COLOR 01 to COLOR 49 (COLOR 08): Selects the light color
for the buttons as notification when there is an incoming call
and during a call. ; OFF: Cancels.
KD-R885BTS/KD-R780BT/KD-RD88BT:
BLINK 1 to BLINK 5 (BLINK 2): Selects the blinking pattern
for the buttons as notification when there is an incoming call. ;
OFF: Cancels.
Default: XX
.
Default: XX
8/8/2016 9:31:39 PM