Telemetry Configuration Page (Standard & Advanced Gui) - Deviation Devo7e User Manual

Telemetry Configuration Page (Standard & Advanced GUI)
The telemetry configuration page allows
specifying alarms when specific telemetry
events occur. This page is accessed from the
main menu via 'Model menu' followed by
'Telemetry'
Telemetry: Specify the telemetry input to use
for alarm control. This can be a temperature probe, voltage probe, or RPM probe.
Equality: Can be '>=' or '<=' indicating whether a value above or below the target causes
an alarm.
Target: The target value for the alarm
Page | 28