Emulator
The emulator provides a side-screen displaying the current virtual-stick/switch states as
well as the Channel output that would be received by the servos
The emulator controls are as follows (based an an English keyboard):
Button
q/a
Q/A
w/s
W/S
e/d
E/D
r/f
R/F
z
x
c
v
b
n
\
Left-arrow
Right-arrow
Up-arrow
Down-arrow Down
Enter
Escape
About Deviation Page
The Deviation release version can be accessed by selecting 'About Deviation' from the
main menu.
USB Page
The USB page cab be accessed by selecting 'USB' from the main menu. USB mode can
then be toggled on/off to enable access to the transmitter's file-system. Note that doing
so should never be done while the model is bound, as USB will disrupt signal
transmission!
Action
Left-Vertical stick (Throttle in mode 2)
Left-Vertical trim
Left-Horizontal stick (Rudder in mode 2)
Left-Horizontal trim
Right-Vertical stick (Elevator in mode 2)
Right-Vertical trim
Right-Horizontal stick (Aileron in mode 2)
Right-Horizontal trim
Gear
Rudder Dual-Rate switch
Elevator Dual-Rate switch
Aileron Dual-Rate switch
Mix 0/1/2 switch
FMode 0/1/2 switch
Power off
Left
Right
Up
Ent
Exit
Page | 10