Main Page Configuration (Standard & Advanced GUI)
The Main Page Configuration page provides
customized control of the main-page layout.
The display of boxes, bars, icons, and trims
along with their contents can all be controlled
from here. This page is accessed from the
main-menu via 'Model menu' followed by
'Main page config'.
Preview
Entering preview by a long 'ENT' press will allow quickly visualizing any changes made
via the configuration page. Press 'EXT' to return to the configuration.
Trim Positions
There are 4 options for the Trim Positions:
None: No trim bars are shown
•
4 outside: Only 4 trims are shown, and they will be placed at the screen edges
•
4 inside: Only 4 trims are shown, and they are placed at the middle of the screen
•
6 Trims: 6 trims are shown, all placed towards the inside
•
Boxes
Boxes are used to display interesting text values. There are 8 available boxes. Boxes 1
through 4 are drawn on the left, and boxes 5 through 8 are drawn on the right. Currently
a box can display one of the timers, one of the output channels, or telemetry data.
Switch Display
Switches are used to display the state of an input or output channel. A switch is either on
(value > 0) or off (value <= 0). Up to 4 switches can be displayed. When a switch is en-
abled, a small indicator box will be displayed on the main page corresponding to the ap-
propriate switch.
Quick-page Selection
Quick-pages allow quick access to other pages from the main page via Long-UP or
LONG-DN buttons. Up to four quick-pages can be configured.
Page | 12