Transmitter Configuration Page; General Settings; Buzz Settings; Lcd Settings - Deviation Devo7e User Manual

Transmitter Configuration Page

The Configuration page defines various
transmitter functions. It is entered from the
main menu via 'Transmitter Menu' followed
by 'Transmitter Config'.

General Settings

Language: Select an appropriate language for all text (Not available on Devo7e)
Stick mode: Select one of Mode 1-4.
Mode 1 is common in Europe. Elevator and Rudder on left, Throttle and Aileron
•
on right.
Mode 2 is common in North America. Throttle and Rudder on left, Elevator and
•
Aileron on right.
Mode 3 has Elevator and Aileron on left, Throttle and Rudder on right
•
Mode 4 has Throttle and Aileron on left, Elevator and Rudder on right
•
Sticks: Calibrate the range of all analog sticks and dials

Buzz Settings

Buzz volume: Set buzzer volume
Vibration: Turn haptic feedback on/off
Batt alarm: Set battery voltage at which alarm will sound
Alarm intvl: Set frequency of alarm when battery is low.
PwrDn alert: Play sound at power-down

LCD Settings

Backlight: Set screen brightness
Contrast: Set screen contrast
Dimmer time: Set delay before screen dims
Dimmer target: Set screen brightness when dimmed

Timer Settings

Prealert time: Time before timer reaches zero to start beeping
Prealert intvl: How often to beep before timer reaches zero
Timeup intvl: How often to beep once timer has expired

Telemetry Settings

Temperature: Set units to display temperature for telemetry
Length: Set units to display length for telemetry
Page | 11