Mixer (Advanced GUI)
The Mixer page controls how inputs
(sticks/switches) are assigned to output
channels. The mixer page is accessed from the
main menu via 'Model menu' followed by
'Mixer'.
The Deviation mixer is modeled after the Er9x implementation. Each output channel is
composed of a series of one or more mixers each of which consists of a single input, an
activation switch, and a function/curve that modifies the mixer output. This is a very
powerful capability, but it is requires a lot of understanding to make full use of. In order
to simplify implementation, there are 3 templates that have been defined to make defining
channels easier.
The number of channels available is dependent on the number of channels selected on the
Model Setup Page (Standard & Advanced GUI). Additionally there are 10 Virtual
channels that can be used as an intermediate step for complex setups.
Page | 13