Page 1
For recirculation of polyurethane materials from proportioner to 55 gal. (200 liter) fluid supply drums. 4000 psi (27.6 MPa, 276 bar) Maximum Fluid Working Pressure Description Carbon Steel Stainless Steel Return Tube Kit 246477 24D106 Circulation Kit 246978 Circulation Kit With Moisture-Lok Hose 24E379 24D107 Important Safety Instructions Read all warnings and instructions in this manual.
Page 2
CAUTION Ref. (CS) (SST) To prevent cross-contamination of fluid, mark A com- No. Description 246477 24D106 ponent (ISO) connections with red tape. Mark B com- ELBOW, 90°; 1/2 in. (13 117532 16C635 ponent (RES) connections with blue tape. Do not...
Page 3
Circulation Kit Circulation Kit Install two return tube Connect circulation kit kits, page 2 Remove fittings from elbows (A, B) at the pro- portioner fluid manifold. Only used with 24697 For 246978: Screw reducing nipples (104) into CAUTION elbows. Connect one end of hoses (102) to To prevent cross-contamination of fluid, mark A com- each nipple.
Page 4
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.
Need help?
Do you have a question about the 246477 and is the answer not in the manual?
Questions and answers