• If you are replacing the rear Wi-Fi antenna, align the two tabs
the corresponding holes in the chassis, and then pivot the cover until it snaps into position.
Figure 50. Installing the Wi-Fi antenna cover
Figure 51. Installing the Wi-Fi antenna cover
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 109.
Replacing the system board
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Note: Each computer has a unique Vital Product Data (VPD) code stored in the nonvolatile memory on
the system board. After you replace the system board, the VPD must be updated. To update the VPD,
see "Updating the BIOS" on page 61.
To replace the system board, do the following:
1
on the rear Wi-Fi antenna cover with
.
Chapter 9
Installing or replacing hardware
107