Lenovo s200 Hardware Maintenance Manual page 107

5. Grasp the old card that is currently installed and gently pull it out of the slot.
Notes:
• The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
• If the card is held in place by a retaining latch, press the card retaining latch
the latch. Grasp the card and gently pull it out of the slot.
Figure 38. Removing the PCI Express card
6. Remove the new PCI Express card from its static-protective package.
7. Install the new PCI Express card into the appropriate PCI Express slot on the system board. See
"Parts on the system board" on page 34.
Figure 39. Installing the PCI Express card
1 as shown to disengage
.
Chapter 9 Installing or replacing hardware
101