Troubleshooting; Messages In The Display - Miele CM6150 Operating Instructions Manual

Troubleshooting

Most problems that occur during daily use can be easily corrected. With the help
of the following guide, you will be able to find the causes of problems and rectify
them.

Warning! Do not open the casing of the machine.
Repairs and other work by unqualified persons can cause considerable danger
to users.
Repairs should only be carried out by a Miele authorised technician.
If you cannot resolve the problem following these instructions please contact your
Miele dealer.

Messages in the display

Error messages must be confirmed with "OK", otherwise the message can
reappear in the display even though the problem has been remedied.
Follow the instructions which appear in the display to troubleshoot an issue.
If after this, the error message appears in the display again, contact your Miele
dealer.
Message
F1, F2,
F80, F82
F41, F42, F74, F77, F235,
F236
F10, F17
66
Cause and remedy
There is an internal fault.
 Switch the coffee machine off with the On/Off
sensor . Wait for approx. one hour before
switching it back on again.
There is an internal fault.
 Switch the machine off with the On/Off sensor .
Wait for approx. two minutes before switching it
back on again.
No water or very little water is being drawn in.
 Remove the water container, fill it with fresh tap
water and replace it.
 Check the stainless steel water intake valve filter
and clean if necessary (see "Stainless steel water
intake valve filter").