Conversion To Lp/Propane Gas; Setting The Pressure Regulator - Fisher & Paykel OR36LDBGX1 Installation Instructions Manual

LP/PROPANE
REGULATION

CONVERSION TO LP/PROPANE GAS

Every range is provided with a set of injectors for the various types of gas.
Select the injectors to be replaced according to the "INJECTORS TABLE".
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the
body of each injector.

SETTING THE PRESSURE REGULATOR

The pressure regulator is accessible through the storage compartment by opening
the bottom pivoting panel; the pressure regulator is positioned on the rear right side
of the range.
To set the pressure regulator:
1. Unscrew the regulator cover;
2. Unscrew the A component, reverse and screw it according to the LP/PROPANE
regulation.
NATURAL GAS
REGULATION
Pressure
regulator
A
component
(fig. 2.5)
REGULATOR
COVER
1
2
Fig. 2.5
2
19