Removing The Wireless Lan Module - Clevo M670SRU Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 8
Wireless LAN
1. Turn off the computer, remove the battery
Module Removal
1. The Wireless LAN module will be visible at point
2. Carefully disconnect cable
a. Remove the cover and
3. The wireless LAN module
Iocate the heat sink.
4. Lift the wireless LAN module
b. Disconnect the cable
and remove the 2
screws.
a.
c. The WLAN module will
pop up.
d. Remove the WLAN
module.
Note: Make sure you
reconnect the antenna
cable to the "Main"
socket (Figure b).
c.
5. WLAN Module
• 2 Screws
2 - 12 Removing the Wireless LAN Module
(page 2 - 5) and the module bay cover
on the mainboard.
1
, then remove the screws
2
3
will pop-up.
5
( Figure d ) up and off the computer.
b.
1
d.
5
(page 2 -
- from the module socket.
4
5
.
8)
3
2
4