Canon imagePROGRAF iPF680 User Manual page 75

iPF680
7
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
8
Make your selection in the
9
Make your selection in the
10
Access the Page Setup pane.
11
Select and click a roll paper in the
12
Select the paper width of the roll loaded in the printer for
selected.
13
D
Select the Enlarged/Reduced Printing check box.
14
G
Click Scaling and enter 120.
• You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the
paper will not be printed.
Note
If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the
•
upper-left corner. In this case, you can center originals by selecting the
15
Confirm the print settings, and then click
• For tips on confirming print settings, see "Confirming Print Settings ."
Note
User's Guide
E
Print Target list.
F
Print Quality list.
A
Paper Source list.
M
Print to start printing.
Resizing Originals by Entering a Scaling Value (Mac OS)
B
Roll Width. In this case, ISO A2/A3 (420.0mm) is
J
Print Centered check box.
P.279
➔
75