Canon imagePROGRAF iPF680 User Manual page 308

Matching
ColorSync
P.311
➔
You need to set each correction on the printer driver.
•
Note • ColorSync needs to be selected in the Color Matching panel of the driver in order to select ColorSync.
• Matching Method
You can select a matching method to suit the print job.
• Gamma
You can adjust the gradation of intermediate tones in an image. 2.2 is normally selected. If you want a softer im-
pression than 2.2, select 1.8.
• You can select only after Driver Matching Mode has been selected in Matching Mode.
Note
• Input Profile
Select the input profile.
• You can select only after ICC Matching Mode has been selected in Matching Mode.
Note
• Printer Profile
Select the printer profile.
• You can select only after ICC Matching Mode has been selected in Matching Mode.
Note
• Soft Proof
When you place a checkmark here, ColorSync applies to the preview area.
• You can select only after ColorSync has been selected in Matching Mode.
Note
308
Setting
Enables color matching by using the ColorSync function of OS X. Select this if you want to
perform soft proofing using ColorSync before printing.
Details
iPF680
User's Guide