Canon imagePROGRAF iPF680 User Manual page 388

Specifying the Cutting Method for Rolls
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
Note
2
Press the OK button. The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6
Press ▲ or ▼ to select Manual, and then press the OK button.
7
Starts printing.
The printer stops advancing the paper after printing.
8
Press the Feed button.
Roll paper is fed to the specified cut position and then automatically
stopped.
9
Cut the roll paper manually with scissors or the like.
10
Press the OK button.
After the roll is rewound, it stops automatically.
388
).
• If the Tab Selection screen is not displayed, press the Menu button.
iPF680
User's Guide