Accounting Manager Basic Procedures; Configuring Unit Costs In Accounting Manager - Canon imagePROGRAF iPF680 User Manual

Hide thumbs Also See for imagePROGRAF iPF680:

Table of Contents

Accounting Manager Basic Procedures

The first time you use the Accounting Manager, use the following procedures to configure the settings.

Configure unit costs, including the costs of ink and paper.

For details of the unit cost settings, see "Configuring Unit Costs in Accounting Manager."

Set options such as the units displayed.

For details of the unit settings, see "Configuring Units and Display Settings in Accounting Manager."

If you are using Regular Data Acquisition, configure the Regular Data Acquisition settings.

For details of the Regular Data Acquisition settings, see "Automatically Acquiring Print Job Logs at Regular Inter-

Specify the jobs to be listed.

For details of how to select the job logs displayed, see "Switching Between Displaying Jobs on Printer and Regu-

larly Acquired Jobs."

This displays the required print job logs and lists the details.

Select Unit Costs in the Settings menu to open the Unit Costs dialog box. Configure the unit cost settings in this

When you select a job and then open the Unit Costs dialog box, items with unit costs that have not yet been config-

ured for that job are shown highlighted.

Setting the Unit Cost for Ink

Setting the Unit Cost for Paper

Setting the Unit Cost for Items Other Than Ink and Paper

User's Guide

Accounting Manager Basic Procedures

Do you have a question about the imagePROGRAF iPF680 and is the answer not in the manual?