Canon imagePROGRAF iPF680 User Manual page 349

iPF680
• Always select media type that is actually set in the printer. When the media you chose is different from the media
set in the printer, you may not receive the desired print results.
Note
• Paper Source
You can select the paper source.
The following settings are available for paper source.
Setting
Manual
Roll Paper
• Roll Paper Width
This selects the width of the roll media set to the printer.
• Available only if rolls are selected in Paper Source.
Note
• Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
Setting
Printer Default
None
Print Cut Guideline
• Available only if rolls are selected in Paper Source.
Note
• Copies
You can input the number of print copies in numerical characters.
The maximum value is 999.
•
• You can change the numbers by clicking either ▲ button or ▼ button.
Note
User's Guide
Select for manual paper feed printing.
Select to print on roll paper.
The value set on the printer operation panel takes priority.
Each page is not cut after it is printed and printing continues without interruption.
A print cut guideline is printed after each page and printing continues without interruption.
Details
Details
Paper Settings Panel
349