Table of Contents
Advertisement
Operation and function
C
12
A
C
B
D
D
Flat side of a needle
15
C
C
D
A
B
Presser foot pressure adjusting screw
Pressure of the presser foot has been factory-adjusted properly.
Therefore you do not need to adjust it except when sewing a special
material.
・ To increase the pressure of the presser foot : For heavy-weight
materials such as denim, tweed, or heavy linen.
・ To decrease the pressure of the presser foot : For light-weight
materials such as georgette, lace, or tricot.
(C): Standard posilion : The lower part of control cap aligns with the
upper tace of cover.
A
Changing the needles
B
Switch the machine off (power switch"O")
・ Using the needle inserter (D) on the cleaning brush will help replace
the needle easily.
1. Turn the handwheel until the needles are fully raised.
2. Before changing the needles, lower or remove the presser foot.
3. Using a small screwdriver, loosen the needle setscrew and remove
the needle.
4. Insert the needle with the flat side away from you into the needle
clamp, making sure it is inserted as far up as possible. Tighten the
needle clamp setscrews securely.
Needles used
A Right-hand needle
B Left-hand needle
C Chainstitch needle
* Needle with No. 75/11 is intended for light-weight materials and general
fabric. Needle with No. 90/14 is intended for heavy-weight materials.
NOTE : To insert the needle into the needle clamp, loosen the needle clamp
screw until flush with the clamp and insret the needle as far as possi-
ble into the clamp.
Types of needles
Household type
No. 75/11
130/705H
or 90/14
Size
Advertisement
Table of Contents
