Sony SRS-X99 Help Manual page 358

Help Guide
Troubleshooting
Personal Audio System
SRS-X99
Initializing the speaker
With the speaker turned on, tap and hold the VOL (volume) – button and the
for more than 5 seconds.
When the speaker receives the signal, the
The speaker is initialized, and it enters the standby mode. All settings of the speaker return to their factory defaults. All
the pairing information and all the network settings are deleted.
Note
If you initialize the speaker, it may not be able to connect your iPhone/iPad/iPod. In this case, erase the pairing
information of the speaker on your iPhone/iPad/iPod, and then perform the pairing procedure again.
(on/standby) button flashes in green quickly for about two seconds.
4-567-508-11(1)
Copyright 2015 Sony Corporation
(on/standby) button at the same time
349