Sony SRS-X99 Help Manual page 283

Help Guide
How to Use
Personal Audio System
SRS-X99
Selecting the BLUETOOTH audio streaming playback quality (Codec)
The "Priority on sound quality" and "Priority on stable connection" modes are available as options for selecting the
playback quality of BLUETOOTH audio streaming. "Priority on sound quality" enables you to playback with a setting of,
not only SBC, but also AAC and LDAC, so that you can enjoy high-quality sound via BLUETOOTH. "Priority on stable
connection" provides you with a more stable BLUETOOTH audio streaming. "Priority on sound quality" is the default
setting.
Playback quality
Priority on sound quality (default setting): Optimal codec is automatically selected from AAC, LDAC, and SBC.
Priority on stable connection: SBC is selected.
1. Set the speaker to the BLUETOOTH/Network standby mode.
The (on/standby) indicator lights up in orange.
2. Tap and hold the VOL (volume) + button and
(BLUETOOTH) indicator flashes in white.
When the setting is changed to "Priority on sound quality" mode, the
When the setting is changed to "Priority on stable connection" mode, the
times.
The playback quality is switched, and the speaker turns on.
Hint
You can switch the playback quality by using SongPal. "Priority on sound quality" appears as [Auto] and "Priority on
stable connection" appears as [SBC] when setting with SongPal.
Note
Communication may become unstable in the "Priority on sound quality" mode, depending on the setting of your
BLUETOOTH device and the ambient conditions. In this case, reset the speaker to the "Priority on stable connection"
mode by performing steps 1 and 2 above.
(on/standby) button at the same time, until the
(BLUETOOTH) indicator flashes 3 times.
(BLUETOOTH) indicator flashes 2
274