Sony SRS-X99 Help Manual page 280

Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established, the
To disconnect, touch the speaker with the device again.
Hint
You can perform pairing or connect to another BLUETOOTH device even when a BLUETOOTH connection is
established. In this case, the previous connection will be disconnected.
SongPal has no function of play music via a BLUETOOTH connection. Play music with your BLUETOOTH device
such as smartphone, computer, etc.
If you cannot connect the speaker, try the following.
Move the device slowly over the N-Mark of the speaker.
If the device is in a case, remove the case.
Make sure that the app screen is displayed on the device.
If you touch a device on the speaker, the device terminates BLUETOOTH connection with any current device (NFC-
compatible headset, etc.), and connects with the speaker (One-touch connection switching).
Note
Stop playback on the BLUETOOTH device and turn down the volume of the device beforehand. Otherwise, you may
experience sudden loud sound output from the speaker when music is played back for the first time after a
BLUETOOTH connection has been made.
If your smartphone turns to standby mode in reacting to magnetism, the speaker may not be able to be connected
with NFC one touch. In this case, turn off the One-touch function. For details, refer to the instruction manuals of your
smartphone.
Related Topic
Disconnecting the NFC-compatible device by one touch (NFC)
Switching devices by one touch (NFC)
Listening to music on a device via a BLUETOOTH connection
(BLUETOOTH) indicator stays lit.
4-567-508-11(1)
Copyright 2015 Sony Corporation
271