Sony SRS-X99 Help Manual page 260

The connection is complete.
10. Connect the Mac to the wireless router to be used.
Hint
If you want to set a fixed IP address, set in the screen in step 6 above.
When the connection of the speaker to your Wi-Fi network has completed, connect your Mac to the previous
destination or your wireless router.
Note
This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from
step 2.
Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after
setting the Wi-Fi security.
When you connect the speaker to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby
function is turned on automatically.
Related Topic
Using the BLUETOOTH/Network standby function
4-567-508-11(1)
Copyright 2015 Sony Corporation
251