Sony SRS-X99 Help Manual page 261

Personal audio system
Hide thumbs Also See for SRS-X99:
Table of Contents

Advertisement

Help Guide
How to Use
Personal Audio System
SRS-X99
Connection method 3: Connecting to a wired network
This section describes how to connect the speaker to a wireless router with a commercially-available LAN cable, then
how to connect the router to the computer.
Usually, the DHCP setting is set to ON when you connect your computer to the network.
Do the following before starting.
Set the DHCP setting of your computer to ON.
1. Check that your computer and wireless router are turned on.
2. Connect the wireless router to the LAN port with a commercially-available LAN cable.
3. Connect the wireless router to your computer using another commercially-available LAN cable, or a Wi-Fi
connection.
4. Turn the speaker on.
The
(on/standby) indicator lights up in green, then the LINK indicator begins to flash in pink. Wait about a
minute until the LINK indicator lights up in pink.
When the connection is completed, the LINK indicator changes from flashing to staying lit in pink.
252

Advertisement

Table of Contents
loading

Table of Contents