Installing The Expansion Card; Removing The System Fan - Dell OptiPlex 5040 Small Form Factor Owner's Manual

Installing the expansion card

1. Insert the expansion card into the connector on the system board.
2. Press the expansion card until it clicks into place.
3. Close the expansion card latch and press it until it clicks into place.
4. Install the:
a. fan duct
b. cover
5. Follow the procedure in

Removing the system fan

1. Follow the procedure in
2. Remove the:
a. cover
b. front bezel
c. hard drive assembly
d. optical drive
3. To remove the system fan:
a. Disconnect the system fan cable from the system board [1].
b. Slide the fan grommets toward the slot on the back wall [2].
c. Lift the fan away from the computer. [3]
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
17