Installing The Intrusion Switch; Removing The Sd Card Reader - Dell OptiPlex 5040 Small Form Factor Owner's Manual

Installing the intrusion switch

1. Insert the intrusion switch into the slot on the chassis.
2. Connect the intrusion switch cable to the system board.
3. Install the:
a. fan duct
b. cover
4. Follow the procedure in

Removing the SD card reader

1. Follow the procedure in
2. Remove the:
a. cover
b. front bezel
c. hard drive assembly
d. optical drive
e. power supply unit
3. To remove the SD card reader:
a. Remove the power supply unit cables from the retention clips on the SD card reader enclosure
[1].
b. Remove the screws that secure the SD card reader and lift it away from the computer [2] [3].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
23