Removing The Optional Ssd Card; Removing The System Board - Dell OptiPlex 5040 Small Form Factor Owner's Manual

Removing the optional SSD card

1. Follow the procedure in
2. Remove the:
a. cover
b. front bezel
3. To remove the SSD card:
a. Remove the screw that secures the SSD card to the computer.
b. Disconnect the SSD card from the connector.
c. Lift the SSD card.
d. Peel away the rubber adhesive from the system board.

Removing the system board

1. Follow the procedure in
2. Remove the:
a. cover
b. fan duct
c. front bezel
d. memory module
e. hard drive assembly
f. optical drive
g. expansion card
h. optional SSD card
i. SD card reader
j. VGA daughter board
k. heat sink
l. processor
3. To remove the I/O panel:
a. Remove the screw that secures the I/O panel to the chassis [1].
b. Remove the I/O panel from the computer [2].
26
Before Working Inside Your
Before Working Inside Your
Computer.
Computer.