System Setup Options - Dell OptiPlex 5040 Small Form Factor Owner's Manual

Option
Server Name
Server IP Address
Server port
Client Address Method
Client IP address
Client Subnet Mask
Client Gateway
DNS IP Address
Domain Name
Advanced
Table 17. System Logs
Option
BIOS Events
Table 18. Advanced configurations
Option
ASPM

System Setup options

NOTE: Depending on the computer and its installed devices, the items listed in this section may or
may not appear.
Description
• DNS (Default)
Allows you to specify the name of the server
Specifies the primary static IP address of the cloud desktop server. The
default IP address is 255.255.255.255
Specifies the primary port of the cloud desktop. The default setting is 06910.
Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)
Specifies the static IP address of the client. The default IP address is
255.255.255.255
Specifies the subnet mask address of the client. The default IP address is
255.255.255.255
Specifies the gateway address of the client. The default IP address is
255.255.255.255
Specifies the DNS IP address of the client. The default IP address is
255.255.255.255
Specifies the domain name of the client.
Allows you to turn on the Verbose mode for advanced debugging. This
option is disabled by default.
Description
Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
Description
Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only
47