Wireless Connection - Foscam R2 User Manual

NOTE：
When logging in for the first time, you will need to download and install the add-on.

2.2 Wireless Connection

There are some ways of wireless connection: EZLink connection, soft AP connection and WPS
connection.
EZLink connection: Use the mobile phones or other mobile devices to download APP, then

connect the camera and the wireless router by the APP. The procedure of the EZLink connection,
please refer to the Quick Setup Guide.
WPS connection: WI-FI Protected Set-up, Press and hold the WPS button on your wireless router

and your camera within 60 seconds. So that your camera and wireless router connect successfully.
WPS (WI-FI Protected Set-up)
Before using WPS wireless connection, you need to:
Make sure that your wireless router has the WPS function, and has been properly connected to the

5