Foscam R2 User Manual page 42

4.4.6 Port
This camera supports HTTP Port. HTTP Port is used to access the camera remotely. If you want to
access the camera and view the video, the HTTP Port must both be configured correctly.
HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number
between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
Another way to change the HTTP port NO.
Step 1: Open the Equipment Search Tool, select the camera you would like to change the port of, right
click on the IP address, and click on "Network Configuration", this brings up the network configuration
box as flowing figures.
Select which camera
you'd like to change the
port for, and right click .
Modify the Http Port .
Enter the Username and
password, click OK.
40