Foscam R2 Quick Installation Manual

Package Contents
Quick Installation Guide
IP Camera
Indoor HD IP Camera with P2P
Model: R2
"Foscam" App download
Quick Installation Guide
Security Warning
Foscam cameras and NVRs require good security
practices to safeguard your privacy. You should
regularly change your camera or NVR password
which is 8-10 numbers, letters, symbols combination.
You should update your camera or NVR regularly.
Make sure your camera or NVR has the latest
rmware installed for your speci c model and better
V1.2
"Foscam" App download
EQR00002 experience.
1
Hardware Introduction
Physical Description
Front panel
CD-ROM Wi-Fi Antenna Power Adapter
Quick Installation Guide
Indoor HD IP Camera with P2P
Model: R2
Warranty Card Mounting Bracket Micro SD Card Slot
Rear panel
Network light
Power
Hardware Installation
Install your camera on the ceiling or wall with the supplied
mounting bracket.
Lens
Infrared LED
WPS/Reset
Microphone
Speaker
Antenna
LAN
Power light
Network Light Status:
Hardware Connection
Network Light
O
Constant
WPS
Flashing every 0.2 seconds
Flashing every 0.4 seconds
1. Install wireless antenna and position upright.
Slow Flash every 1.0 second
2. Turn on your wireless router.
3. Connect the power adapter to the camera.
Please note:
Before you continue, please note: The camera has a 1080P video output. Make sure you have
a much smoother video experience on the smartphone. It
Make sure your smartphone is located near the camera.
recommends that the smartphone has the following
Do not use an ethernet cable to connect the camera
con guration:
if you want to use a wireless connection. And the camera
IOS: system version 8.1 and above.
will play voice prompts "Ready for WiFi con guration" .
Android: systetem version 4.1 and above, and the
Make sure smartphone is connected to your wireless
smartphone has a Graphics Processing Unit (GPU)
router.
function.
Description
No Wi-Fi connection
Flash Wired connection
EZLink takes e ect (default)
WPS is connecting
Wi-Fi connected