Removing And Reinstalling The Pci Card Holder - Lenovo ThinkStation C30 User Manual

Removing and reinstalling the PCI card holder

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to remove and reinstall the PCI card holder.
To remove and reinstall the PCI card holder, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 36.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 37.
4. Lay the computer on its side.
5. Press the two tabs
remove it from the chassis.
Figure 12. Removing the PCI card holder
38
ThinkStation C30 User Guide
1
that secure the PCI card holder
2
inward, and then pivot the card holder to