Lenovo ThinkStation C30 User Manual page 67

4. Remove the PCI card holder. See "Removing and reinstalling the PCI card holder" on page 38.
5. Remove the front fan assembly. See "Replacing the front fan assembly" on page 56.
6. Remove any parts or disconnect any cables that might impede your access to the mini PCI express card
slot on the system board. See "Locating parts on the system board" on page 12.
7. Depending on whether you are installing or replacing an mSATA solid-state drive, do one of the following:
• If you are installing an mSATA solid-state drive, go to step 8.
• If you are replacing an mSATA solid-state drive, press the two tabs
the mSATA solid-state drive upward at an angle of about 20 degrees. Then, remove the mSATA
solid-state drive from the mini PCI express card slot.
Figure 34. Removing the mSATA solid-state drive
8. Touch the static-protective package that contains the new mSATA solid-state drive to any unpainted
surface on the outside of the computer. Then, take the new mSATA solid-state drive out of the package.
1 as shown and carefully pivot
.
Chapter 5 Installing or replacing hardware
55