Replacing The Front Fan Assembly - Lenovo ThinkStation C30 Hardware Maintenance Manual

Lenovo thinkstation machine types: 1095, 1096, and 1097 hardware maintenance manual
Hide thumbs Also See for ThinkStation C30:
Table of Contents

Advertisement

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 127.

Replacing the front fan assembly

Attention: Do not open your computer or attempt any repair before reading and understanding the "Important
Safety Information" on page 1.
This section provides instructions on how to replace the front fan assembly.
To replace the front fan assembly, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 80.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 81.
4. Remove the PCI card holder. See "Removing and reinstalling the PCI card holder" on page 81.
5. Locate the front fan assembly. See "Locating FRUs and CRUs" on page 73.
6. Disconnect the front fan assembly cable from the front fan connector on the system board. See
"Locating parts on the system board" on page 76.
.
Chapter 10
Replacing FRUs
93

Advertisement

Table of Contents
loading

Table of Contents