Adjust Focus With The Focus Assistant - Axis P1365-E Mk II User Manual

Hide thumbs Also See for P1365-E Mk II:
Table of Contents

Advertisement

AXIS P1365-E Mk II Network Camera
Set Up the Product

Adjust focus with the Focus Assistant

Note
• The view in front of the camera should not be changed during focus adjustment. If the camera is moved, or if a finger or
other object is placed in front of the lens, restart the procedure.
• If movements in front of the camera cannot be avoided, the Focus Assistant should not be used.
• If the control button is not released within two seconds, AXIS Dynamic DNS Service is enabled instead of the Focus Assistant.
• If the camera is mounted so that the control button cannot be accessed, you can still use the Focus Assistant. Follow the
instructions but enable the Focus Assistant before mounting the camera.
1. Open the product's home page and go to Setup > Basic Setup > Focus.
2. Under the Basic tab, click Open iris. If the button is inactive the iris is already open.
3. If focus has been set before, click Reset to reset the back focus.
4. Mount or place the camera so that it cannot be moved.
5. Loosen the zoom puller by turning it anti-clockwise. Move the puller to set the zoom level. Retighten the zoom puller.
6. Set the camera to its extreme distant-focus position by loosening the focus puller and turning the focus ring fully clockwise.
7. Press and quickly release the control button. When the status indicator flashes, the Focus Assistant is enabled.
8. Gently turn the focus ring anti-clockwise until it stops.
9. Turn the focus ring slowly clockwise until the status indicator flashes green.
10. To exit the Focus Assistant, press the control button. If you cannot access the control button, the Focus Assistant is
switched off automatically after 15 minutes.
11. Re-tighten the focus puller.
12. Open the Live View page in the web browser and check the quality of the image.
13. On the Focus page, click Fine-tune focus automatically and wait until automatic fine tuning is completed.
14. Click Enable iris. If the button is inactive the iris is already enabled.
15. If needed, make further adjustments under the Advanced tab. See the online help for more information.
21

Advertisement

Table of Contents
loading

Table of Contents