How To Adjust Focus With The Focus Assistant - Axis Q16 Series Installation Manual

4. Re-tighten the zoom and focus pullers.
5. Click Autofocus.

How to adjust focus with the Focus Assistant

Note
Only valid for optional P-iris, DC-iris or manual iris lenses.
• The view in front of the camera should not be changed during focus adjustment. If the
camera is moved, or if a finger or other object is placed in front of the lens, restart the
procedure.
• If movements in front of the camera cannot be avoided, the Focus Assistant should not
be used.
1. Mount or place the camera so that it cannot be moved.
2. Loosen the zoom puller by turning it anti-clockwise. Move the puller to set the zoom
level. Retighten the zoom puller.
3. Set the camera to its extreme distant-focus position by loosening the focus puller and
turning the focus ring fully clockwise.
4. Press and quickly release the control button. When the status indicator flashes, the
Focus Assistant is enabled.
5. Gently turn the focus ring anti-clockwise until it stops.
6. Turn the focus ring slowly clockwise until the status indicator flashes green.
7. To exit the Focus Assistant, press the control button. If you cannot access the control
button, the Focus Assistant is switched off automatically after 15 minutes.
8. Re-tighten the focus puller.
9. Go to the Image tab in the product's webpage.
10. Click Autofocus and follow the instructions from the wizard.
AXIS Q16 Network Camera Series
11
EN